Limelike is an authentic limewash replication, but without the lime!

JUST ADD WATER!

See our LimeLike website for more details

PLEASE TRY OUR SAMPLE SACHETS FIRST TO ASSESS THE DEGREE OF ADHESION TO YOUR BRICK/MASONRY.  YOU WILL ALSO BE ABLE TO SEE THE EFFECTS THAT CAN BE ACHIEVED WITH YOUR PARTICULAR BRICK TYPE.

LIMELIKE CONTAINS POWDERED MINERAL FIXATIVE SO IS VERY DIFFICULT TO REMOVE.

PLEASE NOTE: LIMELIKE SHOULD NOT BE USED ON PAINTED MASONRY OR MASONRY THAT HAS BEEN SEALED OR TREATED WITH WATER PROOFERS.

LIMELIKE WILL NOT WORK ON CONTAMINATED BRICKWORK Please see our LIMITATIONS page

We do not recommend LimeLike for use on floors or patios. 

LimeLike by Dyebrick, is a durable lime-free alternative to old limewashes.  Limewash effects can be easily achieved without the problems of rub-off, dusting and flaking when using on internal and external building materials.

A careful blend of English white clay, quartz and mica, together with pure mineral silicate binders. LimeLike contains no cement. There are no acrylics, solvents, spirits, or any other types of synthetic binder used in our product: We have kept it simple and natural. All you need to do is just add water!

LimeLike will produce a more creamy solution than standard lime and is easier to apply with roller or brush, without dripping or running.

DILUTIONS: LimeLike can be diluted further to produce more transparent effects. If you are diluting more than the original preparation then you will need to purchase our LimeLike Fixative.

LimeLike is 'vapour open', so allows your bricks to breathe. It resists wind driven rain, but does not prevent water vapour to pass through it.

COVERAGE:

Average porosity:         1 litre covers approximately 8 sq.m (86 sq.ft)
Soft absorbent bricks:   1 litre covers approx. 5.5 sq.m (59 sq.ft)
Smooth dense bricks:   1 litre covers approx. 14 sq.m (150 sq.ft)