Dyebrick Sample Pots
Sample Pots contain 100ml of Dyebrick product and are made up individually every day.
They are supplied as a tint solution that mimics the initial dilution of our standard Brick Tinting Kits.
They can then be diluted to reach the required shade or blended with other sample pots to produce specific colours of your choice.
If you want to remove any test areas, then you do not need to add the Fixing Agent. This way if you are not sure about the colour then it can be removed using a small electric pressure washer or by using clean water and a proprietary brick cleaner. However, we still recommend testing on a small inconspicuous area first.
Please note: Even after cleaning there may be a slight colour residue visible on some masonry types.
Fixability Test: Add the fixing agent at a 1:5 Ratio by volume (Fixer/Tint Solution). You can then apply that to a test area and see if it stays on your masonry when pressure washing the next day.
Dyebrick is not guaranteed or recommended for application to horizontal surfaces subjected to wear or pedestrian traffic.
Dyebrick is not recomended or guaranteed for use on Sand-Lime Calcium Silicate Bricks.
SYRINGE: You can also choose to add a syringe to your order. This is helpful when ordering multiple sample colours as you can accurately measure your mix proportions when creating colour blends.
Our products are shipped at a zero rate for destinations outside the European Union. However, by law, you will be liable for Duties and Tax charged at your Country's rate.
Dyebrick is a consumer product and is not for trade use.
Companies wishing to source trade products should visit our wholesale page.
Sample Pots contain 100ml of Dyebrick product and are made up individually every day.
They are supplied as a tint solution that mimics the initial dilution of our Standard Brick Tinting Kits.
They can then be diluted to reach the required shade or blended with other sample pots to produce specific colours of your choice.
If you want to remove any test areas, then you do not need to add the Fixing Agent. This way if you are not sure about the colour then it can be removed using a small electric pressure washer or by using clean water and a proprietary brick cleaner. However, we still recommend testing on a small inconspicuous area first.
Please note: Even after cleaning there may be a slight colour residue visible on some masonry types.
Fixability Test: Add the fixing agent at a 1:5 Ratio by volume (Fixer/Tint Solution). You can then apply that to a test area and see if it stays on your masonry when pressure washing the next day.
Dyebrick is not guaranteed or recommended for application to horizontal surfaces subjected to wear or pedestrian traffic.
Dyebrick is not recomended or guaranteed for use on Sand-Lime Calcium Silicate Bricks.
SYRINGE: You can also choose to add a syringe to your order. This is helpful when ordering multiple sample colours as you can accurately measure your mix proportions when creating colour blends.
Our products are shipped at a zero rate for destinations outside the European Union. However, by law, you will be liable for Duties and Tax charged at your Country's rate.
Dyebrick is a consumer product and is not for trade use.
